Description:
Don't worry anymore!! When you are outside, the automatic watering system can take care of your plants, so you can rest assured to work or travel
Automatic watering device is the best solution for you to take care of plants when you are out on holiday and work
Using an automatic waterer to water the plants regularly every day can effectively extend the life of the plants and make the plants grow well and more lush
Features:
Timing Watering Device: Combine the pump and watering timer in an automatic watering system to pump water from the container, saving 70% water compared to traditional spray and plant irrigation dripper. Water supply of about 400 ml per minute
Two Types of Power: Support two types of power- Lithium-ion battery charging or 5V USB charging
Easy to Use: Setting the irrigation timer takes only couple steps. Example: If you need to water at 9 a.m. every day for 30 seconds, you just need to press "watering time", set it to 9, press "watering duration", set it to 30, press "interval cycle days", set it to 0, finally set "current time", and long press "save" to save the settings.
Program Memory: Once programmed, the settings are stored in internal memory automatically. Custom programming and settings will remain in memory even if power is removed
Travel/Working Good Helper: Solve your daily work, take care of plants when traveling question. Automatic watering device can help you water on time every day, make the plants grow healthier and longer lasting, and make your life easier
How the watering unit helps for caring your plants?
Automatic watering and easy customization on watering cycle
Digital panel and simple three button for easy setting
Included all-in-one accessories, easy 4 steps set up
Two Types of Power; Support two types of power- Lithium-ion battery charging or 5V USB charging
Saving 70% less water than traditional spray
Time cycle settings are stored in internal memory automatically
Your Plants are never be neglected!
Installation:
Step 1: cut the water pipe according to meet the required length
Step 2: install the tee. Install the tee on the cut water pipe. Support two types of power- Lithium-ion battery charging or 5V USB charging
Step 3: Insert a dropper at one end of the water pipe
Step 4: Install the filter, intercept a section of water pipe and insert the filter
Step 5: Connect the host, open the water pipe, connect the water inlet and outlet, and manually open the setting
Step 6: Insert the pot and insert the dropper into the soil (water bucket need to be placed lower than pump in case siphonage effect which is dirt track back into clean water)
Signal of LED light:
Working: green light twinkle quickly
Sleep mode: green light twinkle slowly for each 5 second
Low battery: red light twinkle
Digital number flicking and counting down: pump is watering
Press any button can wake and light up the pump even when it's on working or sleep mode without influencing the set watering schedule
Reliable, Reassurance & free from worry
Intelligent & smart indoor plant irrigation system make you rest assured of caring your plants on time. Easily design your own “garden map ” with customized pipe and different connectors
How to check with your automatic watering system?
Why it's watering weakly or water overdosing? Please check:
Avoid Siphon. Water source / water bucket / water surface level should not be placed higher than the pump
Please adjust inlet and outlet tube and water level to be at the approximately same horizontal level
Please check battery. The pump waters weakly when battery's electricity volume is low
Why it's not working? Please check if these were well set:
Inlet tube and outlet tube were installed correctly. Please check user manual guide
No clogging inside the tube
Power source is workable and battery power is strong
Timer was set correctly
Double Pump Model Packing included:
2x Built-in water pump
1x 10M Water pipe
15x Three-way tap
15x Drops arrow
2x Counterweight filter
1x User Manual
1x Solar Board
