Features
Strong self-adhesive
Aluminium constraining surface
Professional butyl-based construction
Effectively absorbs sound and vibration
Great performance in extreme temperatures
Excellent for sealing against water and air ingress
Eco-friendly material
Non-toxic, odourless and non-corrosive
Mineral oils and petrol resistant
Non-flammable
Easily cut to suit your requirement
Specifications
Material: Aluminum Foil + Butyl Rubber + Wax Paper; Some models are Foams (please check carefully before you buy.)
Color : Black / Silver
Waterproof & Fire Resistant : YES
Recommended Install Temperature: -10°C ~ +60°C
Resistance Temperature Range: -40°C ~ +149°C
Models:
【Sliver-3.6㎡/1 Roll】 (79UN015)
Coverage area: 3.6㎡
Size: 6m * 0.6m
Thickness: 2.2mm
Material: Butyl Rubber
Quantity: 1 Roll
Color: Silver
【Silver-4㎡/1 Roll】 (79UN017)
Coverage area: 4㎡
Size: 8m * 0.5m
Thickness: 2.2mm
Material: Butyl Rubber
Quantity: 1 Roll
Color: Silver
Accessory: With Roller
【Black-4㎡/1 Roll 】(79UN016)
Coverage area: 4㎡
Size: 0.375m * 0.25m
Thickness: 2.2mm
Material: Butyl Rubber
Quantity: 1 Roll
Color: Black
Accessory: With Roller
【Silver-4.68㎡/50pcs】 (79UN030)
Coverage area: 4.68㎡
Size: 8m * 0.5m
Thickness: 2mm
Material: Butyl Rubber
Quantity: 50 Sheets
Color: Silver
Application
Rear decks, Doors, Floors, Any part of the trunk, Quarter panels, Hoods, Pipe lagging,
Installation
1.Decide what part of the car you want to insulate first:roof,floor,doors or a hood.
2.Remove the remains of the factory insulation once you have dismantled the interior.Properly clean and degrease the surface prior to installation of deadener.
3.Measure the pre-cleaned surface of the prospective spot that you are going to treat.
4.Try to locate the piece of material onto the prospective surface of a car without removing an adhesive paper.When your sheet is ready to used,lay that down to the surface and let is glue.Flatten the sheet with hands to avoid air bubbles between
the metal and insulation material.Use a roller for rolling down the foil as a neat step.
Pay Attention:
- Please use gloves for your hands' protection when working with the material.
- Correct installation of material is Presents of successful soundproofing of your car.
- Carefully pre-roll a material to the surface that was priorly cleaned and degreased.
- Special embossing on the foil is made for the convenience of installation so you can see the areas that are
- Rolled properly and those ones that need more pressing.
- Perfect for Automobiles, Condos, Apartments, Studios, Classrooms, Factory and more.
